【豫信致诚】邕宁|马山|河池|钦州|防城港|贵港|崇左软管泵,【拦水带成型机】源头采购经销商

软管泵,【焦作豫信致诚机械设备(南宁市分公司)yxzc1511-50】拥有经验8年,技术专业,坚持以客户为中心,从原材料采购到生产工艺,再到终的产品检验,每一步都严格把关,详情拨打电话免费了解更多,联系人:杨经理,地址:中站李封南会253号。

软管泵工作原理： 一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。 Working principle of hose pump: A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.

泥浆泵软管泵注意部件：活塞、活塞压板、皮碗、活塞座、活塞杆、柱塞杆、进排水阀、进排水阀阀座、十字头、十字头滑套、十字头销轴、曲轴、连杆、连杆上下瓦、连杆铜套、连杆螺钉及母、冠型螺母、骨架油封、O型密封圈、轴承及相配套的齿轮、轴等容易出质量问题，在购买和使用中应当注意。br /！

软管泵维护 1、软管的更换与调整 （1）更换软管时，先将两端管卡螺栓松掉，并将管卡拆下，再将其中一端的吊圈螺栓松掉，将一端短管从胶管中抽出，点动电机将胶管自泵内推出；然后将新的软管从拆下短管的一端插入泵壳与压辊之间，点动电机，将软管装入；再将吊圈固定、管卡装上，至此更换任务完成。尤其注意再安装软管时，务必将软管与泵壳贴紧，确认后方能投入正常运行。 （2）软管使用200小时左右，可将软管转动90度，对单管软管泵除转动方向外，还可前后抽动软管，以改变软管的压点，延长软管的使用寿命。